Brand: NUX
MODEL: TIMECOREDELUXE
NUX Time Core Deluxe MKII Delay Pedal Effects
Store finder
The NUX TIME CORE DELUXE MKII is a delay pedal with 7 different types and a phrase looper; including ΦPhi Digital Delay, Analog Delay, Modulation Delay, Tape Echo, Pan Delay, Verb Delay, Reverse Delay and Sound On Sound. You can switch the delay type by using the Type rotary switch.
S.O.S, Sound On Sound is a 40 seconds stereo phrase looper for guitarists to practice and create new ideas. While in playback, you can quit S.O.S to select another delay mode and use the effect to play, without interrupting the playback. (Note: When quitting S.O.S mode to another delay, the delay effect will be engaged.)
*All the brand and model names mentioned on this page are Trademarks of their respective owners, which are in no way associated or affiliated with NUX Effects and Cherub Technology CO. LTD.
An Intuitive User Interface
Adjusts the delay time. Set the knob parameter to your desired sub-division, then use the Smart Tap Tenpo to get sub-division delay time related to tap tempo.
Time range related to the models:
ΦPhi Digital Delay: 80ms~1000ms
Analog Delay: 40ms~ 403ms
Modulation Delay: 20ms ~ 1500ms
Tape Echo: 55ms ~ 552ms
Pan Delay: 80ms ~ 1000ms
Verb Delay: 80ms ~ 1000ms
Reverse Delay: 320ms ~ 1240ms
Toggle switch
This switch sets the bypass mode and Tone Lock. Selecting Tail sets the Buffer-Bypass to keep the delay with spillover while disengaged. TB means True-Bypass, there is no spillover while you disengage the effect. T.Lock means Tone Lock, an innovative function to store and lock your current parameter setting to prevent accidents on stage. After you set the parameters, just toggle the switch to T.Lock position, then the LED indicator will flash GREEN 2 times to store and lock the parameters. Then you can engage or disengage the effect by the footswitch and no worries.
Footswitch & FS Indicator
Press once to engage/disengage the effect. Press twice, it will become Smart Tap Tempo. The delay time is related to tap tempo and current sub-division parameter. (The FS indicator will flash as current BPM.)
I/O Jacks
DC jack - Use ONLY: 9V Negative Tip power with more than 150mA. (The power consumption is less than 125mA.)
USB-C port
The USB-C port is for firmware updates. Connect USB cable to a PC and hold the footswitch to boot-up the device and to enter the DFU (Device Firmware Update) mode. Once connected you can perform firmware updates using DFU updater software.
In jacks
The audio inputs on the right side of this pedal are standard 1/4" jacks (mono/TS). Connect your guitar to the In (mono) audio input on the right side of your pedal using a regular 1/4" instrument cable.1
The pedal also accepts stereo signals using a pair of 1/4" TS cables.
Out jacks
The audio outputs on the left side of this pedal are standard 1/4" jacks (mono/TS). Connect the audio output of your pedal to the next device in the signal chain, either with a single cable or with a pair of 1/4" cables if both inputs are used.
Features
7 delay types in a compact enclosure.
ΦPhi Digital Delay: Musical digital delay with golden ratio 2nd repeat head. (80ms~1000ms)
Analog Delay: Warm sound with natural treble decay. (40ms~403ms)
Modulation Delay: Lush and rich chorus with digital delay. (20ms~1500ms)
Tape Echo: High-frequency saturation and low-end decay. (55ms~552ms)
Pan Delay: Creative natural stereo feeling. (80ms~1000ms)
Verb Delay: Plate Reverb algorithm with Digital Delay to create an ambient atmosphere. (80ms~1000ms)
Reverse Delay: Inspire guitarists for new ideas. (320ms~1240ms)
S.O.S: 40 seconds stereo phrase loop.
Sub-division with Smart Tap Tempo. (Maximum: 1580ms)
True-bypass or Buffer-bypass(Tails).
Supports Stereo.
Kill Dry.
Low power consumption. (less than 120mA)
Analog dry signal for low noise and zero latency.
The NUX TIME CORE DELUXE MKII is a delay pedal with 7 different types and a phrase looper; including ΦPhi Digital Delay, Analog Delay, Modulation Delay, Tape Echo, Pan Delay, Verb Delay, Reverse Delay and Sound On Sound. You can switch the delay type by using the Type rotary switch.
S.O.S, Sound On Sound is a 40 seconds stereo phrase looper for guitarists to practice and create new ideas. While in playback, you can quit S.O.S to select another delay mode and use the effect to play, without interrupting the playback. (Note: When quitting S.O.S mode to another delay, the delay effect will be engaged.)
*All the brand and model names mentioned on this page are Trademarks of their respective owners, which are in no way associated or affiliated with NUX Effects and Cherub Technology CO. LTD.
An Intuitive User Interface
Adjusts the delay time. Set the knob parameter to your desired sub-division, then use the Smart Tap Tenpo to get sub-division delay time related to tap tempo.
Time range related to the models:
ΦPhi Digital Delay: 80ms~1000ms
Analog Delay: 40ms~ 403ms
Modulation Delay: 20ms ~ 1500ms
Tape Echo: 55ms ~ 552ms
Pan Delay: 80ms ~ 1000ms
Verb Delay: 80ms ~ 1000ms
Reverse Delay: 320ms ~ 1240ms
Toggle switch
This switch sets the bypass mode and Tone Lock. Selecting Tail sets the Buffer-Bypass to keep the delay with spillover while disengaged. TB means True-Bypass, there is no spillover while you disengage the effect. T.Lock means Tone Lock, an innovative function to store and lock your current parameter setting to prevent accidents on stage. After you set the parameters, just toggle the switch to T.Lock position, then the LED indicator will flash GREEN 2 times to store and lock the parameters. Then you can engage or disengage the effect by the footswitch and no worries.
Footswitch & FS Indicator
Press once to engage/disengage the effect. Press twice, it will become Smart Tap Tempo. The delay time is related to tap tempo and current sub-division parameter. (The FS indicator will flash as current BPM.)
I/O Jacks
DC jack - Use ONLY: 9V Negative Tip power with more than 150mA. (The power consumption is less than 125mA.)
USB-C port
The USB-C port is for firmware updates. Connect USB cable to a PC and hold the footswitch to boot-up the device and to enter the DFU (Device Firmware Update) mode. Once connected you can perform firmware updates using DFU updater software.
In jacks
The audio inputs on the right side of this pedal are standard 1/4" jacks (mono/TS). Connect your guitar to the In (mono) audio input on the right side of your pedal using a regular 1/4" instrument cable.1
The pedal also accepts stereo signals using a pair of 1/4" TS cables.
Out jacks
The audio outputs on the left side of this pedal are standard 1/4" jacks (mono/TS). Connect the audio output of your pedal to the next device in the signal chain, either with a single cable or with a pair of 1/4" cables if both inputs are used.
Features
7 delay types in a compact enclosure.
ΦPhi Digital Delay: Musical digital delay with golden ratio 2nd repeat head. (80ms~1000ms)
Analog Delay: Warm sound with natural treble decay. (40ms~403ms)
Modulation Delay: Lush and rich chorus with digital delay. (20ms~1500ms)
Tape Echo: High-frequency saturation and low-end decay. (55ms~552ms)
Pan Delay: Creative natural stereo feeling. (80ms~1000ms)
Verb Delay: Plate Reverb algorithm with Digital Delay to create an ambient atmosphere. (80ms~1000ms)
Reverse Delay: Inspire guitarists for new ideas. (320ms~1240ms)
S.O.S: 40 seconds stereo phrase loop.
Sub-division with Smart Tap Tempo. (Maximum: 1580ms)
True-bypass or Buffer-bypass(Tails).
Supports Stereo.
Kill Dry.
Low power consumption. (less than 120mA)
Analog dry signal for low noise and zero latency.