Brand: JIM DUNLOP
MODEL: M148
Jim Dunlop MXR Micro Chorus Guitar Pedal
Store finder
The Micro Chorus allows you to quickly dial up a stunning range of old-school bucket-brigade chorus sounds with a single Rate control.
This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).
Directions:
- Run a cable from your guitar to the Micro Chorus’ INPUT jack and run another cable from the Micro Chorus’ OUTPUT jack to your amplifier.
- Turn the Micro Chorus effect on by depressing the footswitch; the red LED will illuminate, indicating that the effect is activated.
- Turn the RATE knob clockwise to increase the chorus speed towards a watery shimmer, counterclockwise for a slower rotating sound.
Input Impedance 1 MΩ
Output Impedance 1 kΩ, 1 kHz
Max Input Level -5 dBV, 500Hz
Max Output Level +8 dBV
Rate Control 0.25 Hz, 7.5 Hz
Noise Floor* -89 dBV
Delay Time 4.2 ms, 6.8 ms
Frequency Response
Delayed Signal 20 Hz to 4.5 kHz
Dry Signal 20 Hz to 20 kHz
Bypass True Hardwire
Current Draw 5 mA
Power Supply 9 volt DC
The Micro Chorus allows you to quickly dial up a stunning range of old-school bucket-brigade chorus sounds with a single Rate control.
This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).
Directions:
- Run a cable from your guitar to the Micro Chorus’ INPUT jack and run another cable from the Micro Chorus’ OUTPUT jack to your amplifier.
- Turn the Micro Chorus effect on by depressing the footswitch; the red LED will illuminate, indicating that the effect is activated.
- Turn the RATE knob clockwise to increase the chorus speed towards a watery shimmer, counterclockwise for a slower rotating sound.
Input Impedance 1 MΩ
Output Impedance 1 kΩ, 1 kHz
Max Input Level -5 dBV, 500Hz
Max Output Level +8 dBV
Rate Control 0.25 Hz, 7.5 Hz
Noise Floor* -89 dBV
Delay Time 4.2 ms, 6.8 ms
Frequency Response
Delayed Signal 20 Hz to 4.5 kHz
Dry Signal 20 Hz to 20 kHz
Bypass True Hardwire
Current Draw 5 mA
Power Supply 9 volt DC